Timken Solid Block House Units - CNS Bearings, Authorised Timken Distributor in South India

Solid Block House Unit

Timken® Type E tapered roller bearing housed units feature double-lip seals and locking collars that protect against water and other contaminants. This double-lip seal design blocks debris and retains grease better than single-lip or triple-lip seals, according to Timken 2012 laboratory tests.
solid block hu

Download Catalogue




    Timken Solid Block Housed Units – Robust, Economical Shaft Support

    Where the maintenance advantages of a split housing are not required, Timken Solid Block Housed Units provide a more economical and structurally rigid shaft support solution. These one-piece machined housings accept Timken spherical roller bearings or insert ball bearings and are available in pillow block (foot-mounted), flange-mounted, and take-up frame configurations.

    The solid construction provides greater housing stiffness under load, advantageous in high-load or shock-load applications where housing deflection needs to be minimised. Compare with ourSplit Plummer BlockandSplit Housed Unitif in-position bearing replacement without shaft removal is a maintenance priority. For pre-set, factory-assembled alternatives, see ourAPTM Bearings.

    When to Choose a Solid Block Housed Unit Over a Split Housing

    The choice between a solid block and a split housing depends primarily on maintenance access and the ease of shaft removal at the installation location. If the shaft can be removed readily – as is the case with short shafts, light-weight assemblies, or well-designed machinery with easy access – a solid block housed unit is the appropriate and more economical choice.

    South Indian industries including cement, chemicals, food processing, and general engineering commonly use solid block housed units for drives, conveyors, and machinery where shaft removal is a practicable maintenance procedure. OurTimken Sealsprovide the integrated sealing arrangement, and ourMaintenance Tools– including Timken bearing fitting kits – ensure correct bearing mounting every time. For worn shaft journals beneath seals, ourRedi-Sleeveprovides an in-position repair. Contact CNS Bearings at +91 8951986979 or admin@cnsbearings.co.in.

    Frequently Asked Questions

    Q:  What bearing types are used in Timken Solid Block Housed Units?

    A:  Timken Solid Block Housed Units typically use Timken insert ball bearings (with a spherical outer ring for self-alignment) or spherical roller bearings, depending on size and load requirements.

    Q:  Are Timken Solid Block Housed Units available in different mounting configurations?

    A:  Yes. Available as pillow block (foot-mounted), two-bolt and four-bolt flange, and take-up frame configurations – covering the majority of shaft mounting requirements in industrial machinery.

    Q:  How do I replace the bearing in a Solid Block Housed Unit?

    A:  The shaft must be removed from the housing to replace the bearing. This is why solid block housed units are best suited to applications where shaft removal is practical. For in-position bearing replacement, a Split Plummer Block or Split Housed Unit is the appropriate choice.